woodburning products
gasburning products
jackson fireplace insert
jackson xl fireplace insert
jackson xxl fireplace insert
Chaska Gas Insert
Chaska Gas Insert
932 direct vent fireplace
936 direct vent fireplace
942 direct vent fireplace
944 pier and see thru fireplace
Trimont direct vent
961 bay window fireplace
sp 36 direct vent fireplace
Windom fireplace
dassel unit gas burning
Princeton Direct Vent Fireplace
thief river falls unit
Minnetonka Gas Fireplace
Two Harbors direct vent gas fireplace
Lakefield Stove
Breckenridge direct vent fireplace
Duluth Stove
Handcrafted Cabinetry
product accessories



Give small spaces big appeal with the Two Harbors gas fireplace. The Two Harbors' design possibilities are limitless. The fireplace can be installed in a wall, in a cabinet or even on a kitchen countertop. Modular cabinet options include bases with bookshelves, gourmet wine rack and more. Two Harbors . . . . like nothing else. All cabinet styles can be seen by downloading the Two Harbors brochure (at right).

Standard Features
   14,600 BTU/hr Input-NG & 14,700 BTU/hr Input-LP
  High Efficiency: Natural Gas - 75% LP Gas - 72%
  High Quality Lifetime Borofloat Glass (21" x 14")
   Quick-Latch Glass with Standard Arched Valance
  Refractory Firebrick Panels (Herringbone style)
  High-Low Regulator
  Zero Clearance
  Patented Burner & Log Design
  Minnesota Energy Code Compliant to 50 pascals


Optional Features

  A Full Door Face is required for installation
   Full Door Faces available in Vineyard & Renaissance Patterns
   Automatic Fan Kit with Variable Speed Control (1 - 75 CFM)
  Remote Control or Thermostat Remote Control
  Wall Mount Thermostat (wireless available)
  Complete Cabinet Line


  From Unit Face Top: 1"
  To Flooring: 0"
  From side stand-offs to adjacent sidewall: 1"
  From unit left & right sides & back: 12"
  Minimum Enclosure Height: 47"
   From Upper Grill Outlet to mantel: Refer to Install manual



Always consult the installation manual for venting requirements
 Dura-Vent® DV-GS Pipe Termination - 5" x 8"
 AmeriVent® DV-GS Pipe Termination - 5" x 8"
 Selkirk-Metalbestos® Pipe Termination - 5" x 8"
 HORIZONTAL TERMINATION
 Kozy Heat Part # TWO-WPT, must be used on ALL Horizontal vent runs when a 90o elbow is placed directly on the fireplace to horizontally position the vent system.
 Minimum - 90 degree elbow, followed by minimum 6" piece
 Maximum - 8 Ft.
 Elbows - (2) 90o Elbows (or equivalent) - For each additional elbow, 3 Ft. must be subtracted from maximum venting allowed.
 VERTICAL TERMINATION
 Vertical Minimum - 3 Ft.
 Vertical Maximum - 31 Ft
  'two harbors' direct vent manual
  'two harbors' line drawing
  'two harbors' brochure
     EACH UNIT FACTORY TESTED
     Tested by OMNI-Test Laboratiories Complies with ANSI Z21.88B-2003•C SA 2.33-2003 ‘Vented Gas Fireplace Heaters’
     Sealed Combustion Chamber with Standing Pilot Ignition
     Removable Millivolt Board with 30-Second Delay Pilot
     Requires NO ELECTRICITY
     Automatic Pressure Relief Glass System
     Bedroom and Mobile Home Approved
     Canadian Approved